Gutter Standards

Gutter Choices

noreply@blogger.com (Gutter Standards) — Wed, 01 Oct 2008 20:27:00 +0000

Gutter material choices

Plastic gutter-Poor, due to fading and excessive expansion/contraction
Copper gutter- Great, except for cost
Steel gutter- Good, but suseptable to rust through in the long run
Aluminum gutter- Best for long term durability and cost

Gutter leaf protection

noreply@blogger.com (Gutter Standards) — Tue, 30 Sep 2008 23:27:00 +0000

If you want leaf protection for your gutter;

A leaf cover that is solid and has a curve at the front is a good choice
Some gutters that have a built in cover are overpriced

Gutter rain chains

noreply@blogger.com (Gutter Standards) — Sat, 27 Sep 2008 16:05:00 +0000

Rain chains for gutters
A rain chain is used in the place of a downspout. The water flows out of the gutter and down the chain of decorative buckets in the chain. It is a pretty way to have the sound of a waterfall right next to your house. But don't forget to divert the water away from your foundation at the bottom of the chain.

Gutter pitch or slope

noreply@blogger.com (Gutter Standards) — Fri, 26 Sep 2008 04:00:00 +0000

How much pitch or slope should a gutter have?

Excessive pitch looks sloppy
Zero pitch is acceptable on a gutter less than 40 ft
Standard pitch for a gutter is 1/4 inch drop per 10 ft of gutter

Downspout choices for your gutter

noreply@blogger.com (Gutter Standards) — Wed, 24 Sep 2008 12:52:00 +0000

Every gutter needs the proper size downspout

A 2x3 downspout can handle 650 square feet of roof area
A 3x4 downspout can handle 1200 square feet of roof area

It is best to have the same size spouting all around your house.

What causes a gutter to sag?

noreply@blogger.com (Gutter Standards) — Tue, 23 Sep 2008 12:05:00 +0000

A gutter that isn't supported well at the fron lip will sag.

spikes aren't the best gutter support because they pull out
standard hidden hangers alone need a roof strap to prevent a sagging gutter
roof straps alone allow the gutter to sag because there is no internal gutter support
a hidden hanger with a roof strap is a very strong choice
a Sampson gutter hanger is the best choice because it is hidden and needs no other support to hold up the gutter

Gutter Repairs

noreply@blogger.com (Gutter Standards) — Fri, 19 Sep 2008 16:36:00 +0000

Repairing a sagging gutter is easy;

Start at the ends and lift the front of the gutter untill it is level
Install a Sampson gutter hanger to make the repair
Stretch a string from one end of the gutter to the other, at the top/front
Move along the gutter and pull it up to the string and install Sampson guter hangers

Gutter Problems

noreply@blogger.com (Gutter Standards) — Thu, 18 Sep 2008 13:20:00 +0000

Problems with a gutter comes in many forms;

A clogged gutter is due to not cleaning them in the spring and fall
A sagging gutter is due to poor quality brackets that are weak and not doing their job
Standing water in your gutter is caused by sagging or a poorly piched installation (up to 1/2 inch of standing water is normal)
Water leaking behind your gutter is caused by improperly flashing the gutter to the roof

Proper gutter installation

noreply@blogger.com (Gutter Standards) — Wed, 17 Sep 2008 02:12:00 +0000

Be cautious when choosing a gutter installer.

A gutter that is installed with a run of the mill bracket doesn't hold up well.
If your installer uses a high quality support bracket in your gutter, the result is much better.
Often it is only a matter of pennies more for a better gutter bracket, but it is up to the homeowner to reques it.
Don't be afraid to ask for the best support brackets available. Your cost for an average job would be less than a $40 additional cost.

Gutter

noreply@blogger.com (Gutter Standards) — Tue, 16 Sep 2008 02:34:00 +0000

A gutter has the important function of collecting roof runoff in the gutter and diverting it away from the foundation with a downspout.

A metal gutter is the best choice. Extruded gutter can be made of aluminum, copper or steel.

Copper gutter is pretty but expensive
Steel gutter is likely to rust through in the long run
Aluminum gutter is the best choice over all

Continuous gutter, or seamless, is by far the best gutter system to choose.

Be sure and choose the best possible bracket to install with your gutter. It is the backbone of the entire system.

Gutters st paul mn

noreply@blogger.com (Gutter Standards) — Sat, 26 Jul 2008 11:59:00 +0000

Gutter flashing or apron is the best choice

it has a longer flange
shingles overhang less

gutter basics,connect downspouts,guttering,drain spouts,spoutung,downpipes,gutter leveling,steel gutter, aluminum gutter,steel continuous rainleaders,leaking and sagging gutters,rainspouts and raintroughs, Seamless raintroughs and spouting, wet basement, splash block,errosion, flashing and apron, installing gutter apron, quality work, leaf guard, covers, leaf screens, hail damage, storm repairs, proper gutter installation, eaves troughs and rainleaders,roof runoff, rotting fascia, flashing, raingutters, sagging eaves troughs, dwonpipes,sampson hangers,seamless gutters st paul mn, gutters minneapolis mn,sampson brackets, sampson hangers,gutters mn,gutters chicago il,gutters duluth MN, gutters rochester mn,gutters bloomington mn, guttersburnsville mn,gutters fargo mn,gutters hudson wi,

gutters minneapolis mn

noreply@blogger.com (Gutter Standards) — Fri, 25 Jul 2008 12:35:00 +0000

Seamless gutters come in many colors;

Match the gutters to the color of your fascia
Match the downspouts to the color of your siding

gutters bloomington mn

noreply@blogger.com (Gutter Standards) — Thu, 24 Jul 2008 11:02:00 +0000

Gutters need the proper size downspout;

3x4 downspouts can handle 1200 sq ft of roof area
2x3 downspouts can handle 650 sq ft of roof area

gutters minneapolis mn

noreply@blogger.com (Gutter Standards) — Wed, 23 Jul 2008 11:36:00 +0000

Gutters St Paul Minneapolis MN

Basic gutter info
Who does it right at a fair price

Gutters chicago

noreply@blogger.com (Gutter Standards) — Tue, 22 Jul 2008 12:18:00 +0000

Make sure your contractor uses
Sampson hangers.

The best gutter supports
Long term quality

Seamless gutters Minneapolis MN

noreply@blogger.com (Gutter Standards) — Mon, 21 Jul 2008 12:49:00 +0000

Make sure your contractor uses Sampson Hangers

For long term quality
For the best support in winter ice conditions

Sampson hangers

noreply@blogger.com (Gutter Standards) — Sun, 20 Jul 2008 17:27:00 +0000

Sampson hangers are the best available gutter supports;

Their cantileevered design
they are concealed when installed

Seamless Gutters St Paul MN

noreply@blogger.com (Gutter Standards) — Sat, 19 Jul 2008 22:40:00 +0000

Do your homework;

Basic gutter info
Who does it right at a fair price

Seamless Gutters

noreply@blogger.com (Gutter Standards) — Wed, 16 Jul 2008 16:29:00 +0000

Seamless gutters are the best way to handle roof runoff

If installed properly thay should last about 20 years
hangers need to be spaced at 2ft intervals and be a cantalever type(Sampson Brackets)

seamless gutters,gutter,downspouts,apron,flashing,hangers,supports,leaders,continuous gutters,rainleaders,eaves troughs,k style,downpipes,pitch,eave trough gutters,drip edgegutter basics,connect downspouts,guttering,drain spouts,spoutung,downpipes,gutter leveling,steel gutter, aluminum gutter,steel continuous rainleaders,leaking and sagging gutters,rainspouts and raintroughs, Seamless raintroughs and spouting, wet basement, splash block,errosion, flashing and apron, installing gutter apron, quality work, leaf guard, covers, leaf screens, hail damage, storm repairs, proper gutter installation, eaves troughs and rainleaders,roof runoff, rotting fascia, flashing, raingutters, sagging eaves troughs, dwonpipes,sampson hangers,

Seamless gutters and downpipes

noreply@blogger.com (Gutter Standards) — Mon, 14 Jul 2008 12:40:00 +0000

Seamless Gutters and downpipes

Are necessary to prevent wet basements
Also to prevent erosion

Sagging eaves troughs

noreply@blogger.com (Gutter Standards) — Sun, 13 Jul 2008 23:11:00 +0000

Gutters sag because of poor choices in supporting brackets;

Sampson hangers are the best gutter supports
Look at the "hangers" page

Rain gutters

noreply@blogger.com (Gutter Standards) — Sat, 12 Jul 2008 13:38:00 +0000

Rain gutters and leaders

Are necessary for roof runoff
Need to be properly installed

Eaves troughs and seamless gutters

noreply@blogger.com (Gutter Standards) — Fri, 11 Jul 2008 16:38:00 +0000

Seamless gutters and eaves troughs are the same thing

Get aluminum ones
Use Sampson Hanger brackets

Wet basements

noreply@blogger.com (Gutter Standards) — Thu, 10 Jul 2008 13:33:00 +0000

Wet Basements can be prevented

Make sure the ground slopes away from your house
Have a seamless gutter system installed properly

These two solutions will solve 99% of wet basement problems.

Eaves troughs and leaders

noreply@blogger.com (Gutter Standards) — Wed, 09 Jul 2008 22:24:00 +0000

Seamless gutters and downspouts

Steel is a good choice
Aluminum is the best choice